Manual

THE SET OF HEMMERS

Before attaching any of the hemmers. Be sure

bobbin thread is pulled up. Then, with hemmer m

place, hold top thread loosely and turn handwheel one

full turn toward you, making a loop under hemmer.

Grasp bobbin thread with both hands and slip

horizontally under hemmer toward back. Bobbin

thread will catch loop and carry upper thread to back

of hemmer.

Fold material to suit for two inches along edge,

hold at each end of fold. Slip fold into guide and

up over spoon (Fig. 88). Fold hem in material back of hemmer

and fasten with point of needle. Pull on threads gently as you start stitching.

Draw forward to end of hem

HEMMER SET

You can make a hem 1/4^ 3/8^ 5/8'' or 7/8" in width, depending upon

which hemmer you use. For a few of the many uses see Fig. 89, 90, 91, 92,

93 and 94.