Instruction Manual

Fig.
15
Rg. 16
13
Rg. !7
Fig. 18
ADJUSTING PRESSURE AND FEEDING OF FABRIC
GENERAL SEWING. Usually for straight sewing, the pressure bar cap or darner release Fig
18, IS at Its lowest position and the feed at its highest level-with the drop feed dial knob turned
to the positon marked "NORM" Fig. 19 P e aiai icnob turned
SEWING THIN OR LIGHT WEIGHT FABRICS
When lighter pressure is required to sew satisfactorily on thin
silk or filmy material, the pressure cap should be about halfway
own. Release all the way by pressing the snap lock. A, Fig.
8, and then press cap B down again to half-way spot. Lower
"" 19) to the point
marked SILK"
Fig. 19