Instruction Manual

23
I =
F,9- 26
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot. Fig. 26.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as far as possible and tighten screw.
The mounting slot enables you to sew as close to or
as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
THE EDGESTITCHES
The edgestitcher is used in making
lace insertions, edgings and pipings.
The slots serve as guides. To sew lace
edging to fabric, place the material you
want on top in slot. 1 (Fig. 27) and the
other piece in slot 4. (Fig. 28)
To trim with a wide piping, place Fig. 27 28
the fabric in slot 4, and the fold of the .. -i ¡. o rho folded edge of
p.pmg to the left in slot 3, ior a narrow piping, place the fabric rn slot 2 and the folded edge
the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
i’.