Instruction Manual

28
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make
and insert covered cording, and to
sew in zippers. Loosen thumb screw
to slide foot to either right or left
of needle.
CORDING. Fold bias strip of
fabric over cord. Loosen thumb
screw and set foot so needle is cen
tered in needle hole. Machine taste
cord in place (Fig. 34 )
Fig. 34
TO sir covered ooid to material, reset adjustable loot so ueedle stitches closer to cord, and
on edge of base fabric.
SEWING IN ZIPPER
Loosen thumb screw and slide foot so needle
enters center of needle hole. Guide metal of zipper
along edge of foot (Fig. 35). Stitching should be
close to zipper to allow easy opening and closing.
Adjust to sew from either right or left side, which
ever is more convenient.
Fig. 35
- V
-I
-li
rP.
^ %
•