User guide

16. STRETCH STITCH SEWING
Adiusting your machine for stretch stitching, by moving special
stitch control lever to the right position until the lever is against
the SS. (Fig. 18)
*This machine is capable of producing stretch stitch on both
straight and zigzag seams.
(A) Straight Stretch Stitch
When the special stitch control lever is in the position as
described above and the stitch width knob is at ’o’. The stitch
length can be adjusted as desired according the thickness of
the material being sewn. .
(Bi ZIGZAG STRETCH STITCH
The same manner as above except the zigzag width knob must
be moved to beyond 0 to any number.
Setting this control between '3' and '5' will probably give you
the best result. The stitch length dial can also be adjusted in
the same manner as described above for straight stretch sewing.
NOTE. FOR ALL NORMAL SEWING LEAVE THIS CONTROL AT
THE ’M' POSITION.
NEVER MOVE THIS CONTROL UNLESS THE NEEDLE IS
FULLY RAISED OUT OF THE MATERIAL BEING SEWN.
Fig 18
14-