User Manual

Set needle
position by
towards you
Changing Needle
in the highest
turning handwheel
Loosen needle clamp screw and
take out needle.
With flat face away from you,
insert a new needle into groove
of needle bar.
Push needle until it reaches
stopper (a) and tighten needle
clamp screw firmly.
Proper needle
straight shaft
sharp point
Always use a straight needle with
a sharp point.
Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread: it also can damage
hook and needle plate.
-6-