Owner manual

CHANGE NEEDLE POSITION LEVER
Needle position lever is to set a needle position- LEFT ►, CEN^
TER ♦ and RIGHT M by removing the lever at a desired position.
1. Set needle position lever (E) at the left and remove zigzag stitch
width dial slowly to a desired position and back it to the “0”
point, then a left-lined stitching is attained.
2. Set needle position lever at the center and remove zigzag stitch
width dial to a desired position and back the lever to the starting
point, and repeat it. Then, a center-lined stitching is attained,
3 Set needle position lever at the right and remove zigzag stitch
width dial slowly to a desired position and back it to the “0”
point, then repeat it and a right-lined stitching is attained.