Owner manual

23
HOW TO USE ACCESSORIES
Narrow Hemmer: With needle at its highest position replace regular
presser foot with narrow hemmer (Fig. 40) being sure to tighten, it securely
in place. Set blind stitch lever in the M position, and zigzag stitch width
control at 0 for straight stitched hem or at number 3 for zigzag stitched
hem. Set stitch length control to suit.
For a plain narrow hem make a 14, inch double fold
for about two inches along edge of fabric. Hold each
end of the two inch fold, slip underneath hemmer. Bring
fold up into the scroll of hemmer, draw fabric forward to
end and fasten with point of needle. Lower presser bar
lifter. Gently pull end of thread as you start stitching
(Fig. 41 for straight stitched hem, Fig. 42 for zigzag
stitched hem).
0 Q QQrjrM iK li:
Guide material slightly
turn through scroll.
The narrow hem provides an excellent finish for edges
Fig. 42