Owner manual

34
•'.&»
y
ATTACHMENTS
Be sure the needle positioning 1«
extreme left hand position.
the
Fig. 60
EDGESTITCHER
The edgestitcher is used in making
dainty lace insertions, edgings and
piping.
The slots in the edgestitcher serve
as guides in sewing together various
pieces of material. If you want to
sew lace, lace and embroidery, or
lace and tucked strips together, place
the piece of material that will be on
top in. slot 1 (Fig. 62) and the lower
fabric in slot 4. For instance, if you
are sewing lace edging to a finished
edge of fabric, place the fabric in
slot 1 and the lace in slot 4 (Fig.
62).
ATTACHMENT FOOT
In order to attach binder, edgestitcher and the hem-
mers, it is necessary to remove the presser foot and re
place it with the attachment foot. (Fig. 60)
Mount binder, edgestitcher or hemmers by sliding
the attachment to the left as far as possible and
tightening the screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move
the attachment to the correct position before tightening
the mounting screw.
/
- if V f. -i-i.-.'.
Fic
Fig. 62