Owner manual

THE SET OF HEMMERS

with hemmer inplace,

.- 't 4 t .

handwheel one

full

under hemmer.

G rasp

and slip horizon

tal -

Bobbin thread

will

Before attaching any of the hemmers, be sure bob- ' f

bin thread is pulled up. Then,

hold top thread loosely and turn

turn toward you, making a loop

bobbin thread with both hands

ly under hemmer toward back.

catch loop and carry upper thread to back of hem

mer.

Fold material to suit for two inches along edge,

hold at each end of fold. Slip fold into guide and

up over spoon (Fig. 71). Fold hem in material back of hemmer. Draw forward to end of hem

and fasten with point of needle. Pull on threads gently as you start stitching.

Fig. 71

HEMMER SET

You can make a hem Y a" , Y," or Y" in width, depending upon which

hemmer you use. For a few of the many uses see Figs. 72, 73, 74, 75, 76

and 77.