Manual

THREADING CHART
1 Use any type thread which is suitable for the fabric being
’ sewn. This includes mercerized, 00, silk and synthetic
threads.
2 The thread is passed through rear thread guide A, then slides
between two tension discs, B under pin C, through front
thread guide D , . . then down through needle clamp guide
hole E . . . and entering from the underside of needle hole F.
3 Leave thread about 2 to 3 inches past needle hole.
THREADING NEEDLE
I To thread needle at point F
a.
b.
c.
d.
Swing work plate out of way
Depress cylinder out of way
with knee lifter (R-152)
Hold thread between index
finger and thumb
End of thread must be stub
not feather edge.