Instruction Manual
Table Of Contents
- TABLE OF CONTENTS
- tNTRODUCTtON
- SECTION I
- KNOW YOUR MACHINE - MODEL 2000 ATS
- SUPERLOCK SET UP & MAINTENANCE
- HINTS FOR SUCCESSFUL STITCHING
- Thread Selection
- NEEDLE REPLACEMENT
- NEEDLES, THREAD & FABRIC CHART
- SECTION II - THREADING & TENSION
- )
- NEEDLE THREADER
- HELPFUL HINTS - CHANGING THREAD
- TESTING STITCH
- THREAD TENSIONS
- ADJUSTING THREAD TENSION
- SUPERLOCK SEAMS & SEAM FINISH
- ADJUSTING STITCH LENGTH
- ADJUSTING CUTTING WIDTH & BALANCE OF STITCH
- ADJUSTING CUTTING WIDTH
- SECURING BEGINNING & END OF SEAM
- OUTSIDE CORNERS
- INSIDE CORNERS
- CORDED OVERLOOK
- RIBBING
- CASING OR HEM FOLD
ADJUSTING CUTTING WIDTH
The cutting width can be changed for different techniques and types of fabric.
Loosely woven or heavy knit fabrics require a wider width and lighter weight
fabrics require a narrower seam width.
Machine Settings
Stitch length: 2.5 - 3.0
Stitch width: 6
Fabric
Medium weight woven
Tension Settings
Normal
Serge
Serge along one edge with the stitch width on 4mm. Serge along the
other edge with the stitch width at 7mm.
For a narrow or wide stitch width, see three thread sewing techniques on pages
38 and 39.
26