User's Manual

External devices that have a built-in Bluetooth feature can connect wirelessly

to the Sing alongUnit.

Bluetooth O

eration

Pairing a Bluetooth device (No LINE IN device is plugged)

1. Power on the unit by press the ON/OFF button, Power indicator will light.

2. Set the Bluetooth function of your external device to ON and begin

searching for devices.

NOTE: The effective distance between your external device and this

apparatus is 10 meters (30 feet).

3. Once “SMK250” appears on the paired device list of your external device,

select it.

4. If you are asked for a password, enter “0000”.

5. “Connected” will be heard and Pair indicator light blue steadily that

indicates a connection has been established.

6. A few seconds later your Bluetooth connection should be ready to use.

Note: After initial pairing, the unit will stay paired unless unpaired manually by

the user or erased due to a reset of the device. If your device should become

unpaired or your find it is unable to connect, repeat the above steps or press &

hold the PAIR button again.

1ˊ Follow the “Getting Connected” steps above to pair your external device.

2ˊ Turn on the music player program on your external device and set it to

play.

3ˊ Audio played through the connected Bluetooth Device will now be heard

through the speakers.

4ˊ Adjust the MASTER VOLUME to obtain the desired volume level.

Getting Connected

Playing Music from an External Bluetooth Device

External (auxiliary) audio sources or MP3 players can connect to the Sing Along unit via

LINE IN.

1. Connect a 3.5mm Auxiliary Cable (not included) to the LINE IN jack at the

left side of unitand to the Audio Output or Phones on the audio device you

wish to play.

2. Turn on both units. (The sound “Aux mode” can be heard) .

3. After the connection, the external device will sound from speakers of your

unit.

Please note:-If not use the this function, please unplug it.

LINE IN

(

AUDIOIN

)

Auxiliar

eration