Instruction Manual

Specifications
AUDIO SECTION
Output Power .............................................................................................................. 1.8 Watts (RMS) x 2
Output Impedance................................................................................................................................8 Ohms
BLUETOOTH
Bluetooth Version........................................................................................................................................V4.2
Working Distance ................................................................... Up to 10 meters measured in open space
LINE IN SECTION .....................................................................................
3.5 mm Stereo line in jack
MICROPHONE SECTION ....................................................................... 3.5mm Condensor Microphone
POWER SECTION
Battery ............................................................... DC6V (”C” cell 1.5V x 8pcs) (batteries not included)
Power Adaptor....................................................................................... Input AC 100-240V ~ 50/60Hz
................................................................................ Output DC 5.6V 1A (Positive Center)
DIMENSION
............................................... 12.7W x 6.5L x 12.3H inches /32.2 x 16.5 x 31.1cm
WEIGHT ...........................................................................................................................
1.3kgs / 2.8lbs
Specifications are subject to change without notice.
Please retain the instructions for further reference, as they contain important information.
Microphone jack
MICROPHONE
POWER
ADAPTOR
DC jack
LINE IN jack
YOUR
AUDIO DEVICE
(sold separately)
LINE IN CONNECTION
This unit is able to connect your favorite audio device
(e.g. iPhone/Tablet/MP3 player, etc.). You can connect
your device by using a 3.5mm audio cable (not included).
LINE IN function is automatically selected once the audio
cable is plugged in.
Warning
- To avoid excessive over amplified sound output, it is
recommended that the volume control is initially adjusted
to one third or less and then increase if required.
Making the Connections
MICROPHONE CONNECTION
Connect the provided microphone into the microphone
jack. Ensure that you turn the microphone to the ON
position prior to using it.
Note:
- Do not drop or tap the microphone as
damage to the microphone or speaker may
occur.
- Do not twirl the microphone cord as it will
cause damage to the encased wiring.
POWER ADAPTOR OPERATION
Insert the DC plug of the power adaptor into the DC jack on
the unit. Plug the other end into a standard AC outlet.
CAUTIONS:
- The AC Adaptor has a polarized plug that fits into the wall
outlet only one way. If the plug does not fit properly, turn it
over and try again. Do not force it.
BATTERY OPERATION
1. Switch off the unit and remove the AC power adaptor
from the power socket.
2. Remove the battery compartment cover on the back of
the main unit as shown.
3. Insert eight (8) “C” size alkaline batteries (not included) as
indicated on the right diagram.
4. Replace the cover tightly before operating.
CAUTION:
- Replace all batteries at the same time.
- Do not mix old batteries with new batteries.
Operation
1
Connect the unit as described previously.
Press the POWER button to turn the unit
on; the power indicator will light on.
USING A BLUETOOTH DEVICE
2
The Bluetooth pair indicator will blink rapidly
to indicate it is in the pairing mode.
You may also press and hold the PAIR
button to initiate the pairing mode.
Switch on the Bluetooth function of your Bluetooth compatible device within three
feet of the unit. You will see “Mood” appear on your device’s search list.
Select “Mood” to start pairing. Wait for completion of the pairing and the Bluetooth
indicator will light solid. Please always refer to the user manual of your bluetooth
device for detailed instructions.
Note:
If your Bluetooth device prompts you for a passcode during the pairing process, please enter
“0000” to connect. If pairing fails, repeat steps. If you have paired before, a list of previously
searched results will be displayed. Select “Mood” again. On some Bluetooth devices
(i.e.,computers), once pairing is complete, you must select your Bluetooth device as “Use as
Audio Device” or similar.
PLAY/PAUSE: Press the Play/Pause button on the Bluetooth device or PAIR button on the
unit to start.
SING-ALONG WITH LINE IN MUSIC
4
Connect the audio device to the LINE IN
jack on the side of this unit. It will allow
the audio to be played through your unit.
LINE IN function is automatically selected
once the audio cable is plugged in.
Note:
• It is highly recommended to set the volume
on the auxiliary unit to 1/3 or lower to avoid
distortion.
SING-ALONG WITH MICROPHONE
5
Connect the microphone into the microphone jack at the side of
the unit.
Turn on the microphone by slide the ON/OFF switch to the ON
position before singing. You can also connect an extra
microphone (not included) to another mic jack.
6
Adjust the volume to a comfortable level
by rotating the MASTER VOLUME
control on the unit.
7
Adjust the ECHO control to add an echo
effect to your voice.
8
Press the POWER button to turn the unit
off; the Power indicator will turn off.
SING-ALONG WITH LIGHTING EFFECT
3
The light effect will turn on automatically
when the power on. By pressing the LIGHT
MODE button once, the light effect will
change faster, press again to turn light
effect off.
ON
OFF
POWER
LIGHT
MODE
ON / SPEED / OFF
w
OR
y
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow the battery manufacturer’s directions.)
7. Remove the batteries promptly once its charge is low.
8. Clean the battery contact and also those of the device prior to installing the battery.
x
LIGHT
MODE
ON / SPEED / OFF
ON
OFF
POWER
u
v
ON
OFF
POWER
W
V
U
t.