Instruction Manual
— E6 —
Connection
Energy Saving (Auto Power System-APS)
The unit will automatically enter the Standby mode after 20 minutes in the following
situations:
1. There is no audio playback on CD/USB/Bluetooth/Line in mode;
2. The playback of external music player had been stopped but the audio cable is still
plugged into the LINE IN jack.
The unit can be resumed to turn on by pressing the
button once.
APS is for energy saving purposes.
Connecting to AC Power
Insert the AC power cord into a
conveniently located AC outlet having
120V AC, 60Hz.
Note:
Make all connections before connecting to
AC power.
Inserting Batteries
1
Slide the battery door in the direction
the arrows to reveal the battery
compartment. Insert eight (8) “C” size
alkaline batteries (not included) as
indicated on the diagram.
2
Replace cover tightly before operating.
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old b
atteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable b
atteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
INSTALLATION OF BATTERIES
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V
¶&·6,=(80
1.5V