User Manual

11
Scanner Installation Steps
The scanner installation consists of the following steps:
1. Position the scanner — locate near desired antenna locations.
2. Connect external antennas — see page 12.
3. Place the antenna for optimum read/write operation —
see page 12.
4. Connect the scanner to PC serial port or RS-232— see page 13.
5. Connecting to a DC source— see page 14.
6. Configure the scanner — see page 15.
7. Align the antenna — see page 18.
U519 FCC rewrite 2-22-01.p65 2/22/2001, 2:43 PM11