Manualshelf

User Manual

ManualsBrandsSingle Chip Systems ManualsElectronics9 Antenna InstaScan Scanner, Model U519
11121314151617181920
14
Connecting to an AC Outlet
The following procedure describes how to connect the scanner to an AC
Outlet.
1. Verify that the On/Off switch on the scanner front panel is in the
OFF (down) position.
2. Connect the power cord to the AC receptacle in the scanner front
panel.
3. Connect the other end of the power cord to the wall outlet.
4. Set the On/Off switch to the ON (up) position. The Power ON LED
light will illuminate.
U519 Manual.p65 10/27/2000, 4:35 PM14