Datasheet

ManualsBrandsSingleTact ManualsForce SensorsCalibrated Capacitive Force Sensor 15mm 45N (10lbs)

SingleTact is the most refined miniature force sensor that is performance oriented. Ultra-thin, single-element

capacitive sensor with industry-leading sensitivity and repeatability that accurately and reliably quantifies forces.

SingleTact FEATURES

MINIATURE FORCE SENSORS

SingleTact

OEM

EASY TO USE

SingleTact Sensors are designed to

be versile, but user-friendly.

ACCURACY

SingleTact has the best accuracy among

thin ﬁlm force sensors.

CUSTOM DESIGN

SingleTact can be customized for your

OEM applicaons.

REPEATABILITY

SingleTact has repeatability errors that

are less than 1.0% of FSR.

Ultra-thin force sensors come in sizes of 8mm and 15mm diameter that is only 0.35mm thick.

Highly sensitive and repeatable sensors provide high dynamic range and errors less than 1.0%.

Simple Analog 3-wire interface for immediate DAQ integration.

I2C interface for digital integration.

Arduino and DAQ Software to begin collecting data right out of the box.

Custom designed solutions available for OEM applications.

Summary of content (5 pages)

PAGE 1
SingleTact MINIATURE FORCE SENSORS SingleTact is the most refined miniature force sensor that is performance oriented. Ultra-thin, single-element capacitive sensor with industry-leading sensitivity and repeatability that accurately and reliably quantifies forces. REPEATABILITY SingleTact has repeatability errors that are less than 1.0% of FSR. ACCURACY SingleTact has the best accuracy among thin ﬁlm force sensors. EASY TO USE SingleTact Sensors are designed to be versitile, but user-friendly.
PAGE 2
SingleTact MINIATURE FORCE SENSORS SENSOR PERFORMANCE 500:1 Typical Signal to Noise Ratio (SNR) < 0.2% of Full Scale (FS) Force Resolution 300% of FS Maximum Force Typical Repeatability Error < 1.0% (1 sigma of FS) Operating Temperature -40°C – 200°C Temperature Sensitivity Up to 0.2%/°C < 2.0% Linearity Error < 2% per logarithmic time scale Drift Hysteresis < 4.0% < 1ms(Measured using Oscilloscope) Response Time Polyimide Contact Surface Material 0.
PAGE 3
SingleTact MINIATURE FORCE SENSORS PINOUTS DIAGRAM FOR SENSOR & I2C BOARD 1. GND 2. GND (Both GNDs must be connected) 3. Sense 123 MCU 8 7 6 5 1 2 3 4 1. 2. 3. 4. 5. 6. 7. 8. Vcc (3.7V to 12V) Analog output (2V swing, 0.5 to 1.
PAGE 4
SingleTact MINIATURE FORCE SENSORS SENSOR MECHANICAL SPEC-15mm 15mm Dia. 0.35mm SENSORS S15-4.5N +Full scale Range: 0.45kg (1.0Ibs) +Minimal Detectable Force: 0.9g S15-45N +Full scale Range: 4.5kg (10Ibs) +Minimal Detectable Force: 9g 50mm S15-450N +Full scale Range: 45kg (100Ibs) +Minimal Detectable Force: 90g CABIBRATED SENSORS CS15-4.5N +Full scale Range: 0.45kg (1.0Ibs) +Minimal Detectable Force: 0.9g 0.27mm 3.5mm CS15-45N +Full scale Range: 4.
PAGE 5
SingleTact MINIATURE FORCE SENSORS SENSOR MECHANICAL SPEC-8mm 8mm Dia. SENSORS S8-1N +Full scale Range: 100g (0.22Ibs) +Minimal Detectable Force: 0.2g 0.35mm S8-10N +Full scale Range: 1.0kg (2.2Ibs) +Minimal Detectable Force: 2g 50mm S8-100N +Full scale Range: 10kg (22Ibs) +Minimal Detectable Force: 20g 0.27mm 3.5mm CABIBRATED SENSORS CS8-1N +Full scale Range: 100g (0.22Ibs) +Minimal Detectable Force: 0.2g CS8-10N +Full scale Range: 1.0kg (2.