Installation Guide

Bath Sinks: Undermount
Undermount sinks are the ideal choice for a clean high-end look
with granite or solid surface countertops. This installation maximizes
countertop space and highlights the elegance of your countertop.
1. Flip sink upside down on
a sheet of craft paper or
cardboard and trace the
outside rim of the sink. Select
preferred countertop offset.
See diagram. Measure the
distance between the edge of
the basin and the inside edge
of the lip. Add a second line
insidetherstaccordingto
this measurement. Cut out the template along the second line.
2. Place the template onto the countertop and cut the hole into
the countertop.
3. Use clear or Sinkology antique
brown neutral cure 100%
silicone (#SINSTALL-101) on
the rim of the sink. Mount
sink under the countertop
using approved countertop
mounting hardware. See
diagram. Sinkology does
not provide under mounting
hardware due to the wide
varietyofmountingsurfaceswhichrequirespecichardware.
Contactyourcountertopmanufacturerforspecicmounting
hardware.
4. Slide the drain through
the drain hole in the basin.
Use plumbers putty on the
underside of the drain lip to
seal the drain assembly to the
sink and clean off and excess
See diagram.
Important
Sinkologyundermountsinksdonotincludemountinghardware.We
recommend providing your sink details to your countertop manufacturer
for approved mounting hardware and method.
7
PRO
DIY