Installation Guide

Step 1. Flip sink upside down and trace outside edge onto craft paper or
cardboard. Outline faucet to ensure necessary clearance. Cut out
template and place on the countertop.
Step 2. Find and mark the
center of the sink
based on the
template. Remove
template from
countertop. Drill
a 2 3/4” diameter
hole in the center
and chamfer the
top edge of the
hole by 1/8”.
Step 3. Apply silicone to
chamfer and
mount sink to
countertop using
waste tting and
supplied Washer.
Step 4. Clean excess silicone and mount faucet.
Step 5. Treat copper sinks with Sinkology Copper Armor for maximum
protection (apply based on directions on bottle).
Counter Top
Plumbers putty (or Silicone)
Steel Washer
White Washer
Black Washer
Brass Locknut
Counter TopCounter Top
2-3/4”
Diameter
Hole
1/8”
1/8”
BATH – VESSEL INSTALLATION