Instructions / Assembly

ENGLISH

1 HOLE INSTALLATION

7 INSTALLING MOUNTING RING

Place Mounting Ring (7A) over Putty Ring (7B) and sink hole. Align Mounting Ring (7A) to

the center of sink hole. Place a bead of plumber’s putty in the bottom groove along the

outer edge of Putty Ring (7B).

8 BODY INSTALLATION

Insert Faucet Supply Tubes (8A) and Mounting Shank (8B) through the hole in Deckplate

(8C) or Mounting Ring (8D).

9 SECURING SPOUT BODY

From underneath sink, place Washers (9A), (9C) and Locknut (9B) over Hose (9H) and Supply

Tubes (9D). Thread loosely onto faucet shank (9E). Make sure that Handle (9F) is properly

aligned to sink. Tighten faucet rmly to sink, using the provided Installation Tool (9G).

10 HOSE ATTACHMENT

From underneath sink, push Hose Connector (10A) onto receiving Tube (10B). Push up

until unable to push any further. To remove Hose, press on the Tabs (10C) and pull Hose

Connector (10A) down.

10A

10B

10C