Instructions / Assembly
Installation Guide: Kitchen Drop-In Sink
©SINKOLOGY 2018
PRO
DIY
Granite Composite Kitchen Sink
Drop-In sinks are designed to be easy to install in a wide range of countertop materials.
Sinkology granite composite sinks make updating your kitchen design effortless.
Single-Bowl Models: #SK600-33GY, #SK600-33BL, #SK600-33WH
Double-Bowl Models: #SK601-33GY, #SK601-33BL, #SK601-33WH
See reverse for Faucet Hole Options
1. Flip sink upside down and trace the outside edge onto craft paper or cardboard
to make your own install template. Add a second line that is 1/2” inch inside that
line. Cut out the traced template using the second line.
2. Position the template at on the countertop and align with cabinet and plumbing
connections.
3. Mark openings and cut the countertop. Always double check the sink for t
inside the hole before moving on.
4. Before dropping your new sink into the countertop for the last time apply a
thick bead of Sinkology clear neutral cure 100% silicone around the hole on the
countertop to form a water tight seal around the sink. See our Complete Silicone
Installation Kit (#SINSTALL-101).
5. Install hardware. See diagrams.
6. Claws can be bent to accommodate larger or smaller gaps. Tighten evenly until
all of the clamps grasp the underside of the countertop rmly and securely.
7. Install drains.
8. For a professional look apply a thin bead of Sinkology clear neutral cure 100%
silicone around the rim.
9. For regular maintenance simply wash with gentle soap and water.
10. Register your new sink at sinkology.com/registration.
Hardware Included:
8 Clips