Installation Instructions

Bathtubs: Freestanding
Every Sinkology copper bathtub is skillfully hand-hammered
andcarefullynishedbyourteamofcoppersmiths.Each
bathtub is hand-tested multiple times to ensure no leaks and
perfect performance.
1. Gather the products being installed and the tools you will need.
It’s easier to install your drain and faucet before placing the tub.
2. Installthedrainandoverowdrainsontothebathtubperthe
drainandoverowkitinstructions.
3. Install the faucet per the manufacturer’s instructions.
4. Place bathtub in desired location and mark exact location on the
oor.
5. Runthedrainpipesthroughtheoorandattachtothe
plumbing. This step is best handled by a professional.
6. Onceplacementisnal,apply Sinkology antique brown or
clear neutral cure 100% silicone (#SINSTALL-101) caulk around
the tub. Allow the caulk to set for 24-hours (or timing per the
manufacturer’s instructions) before using your copper tub.
Important
Sinkology copper bathtubs are handmade so variations in dimensions can
occur.Werecommendperformingrough-inprocedureswiththebathtub
on site to ensure the correct installation.
17
PRO
DIY