Operation Manual
EMBROIDER
Thread runs out partway through a design
When the upper thread or the bobbin thread runs out while sewing, the sewing machine stops.
Move the needle back about 10 stitches and resume sewing.
Memo
• When the bobbin thread runs out, cut the threads and remove the embroidery frame before
replacing the bobbin thread.
1.Set the upper thread or bobbin thread.
2. Press .
Memo
• If the needle count is not displayed, display the needle count on the screen. For details, refer to
"Stopping while embroidering".
3.Press .
4 Press (Back one stitch) to move the needle back about 10 stitches. (Forward one stitch) increases
the stitch number.
5.Restart the embroidery.
128/135 SINOJO OPTOELECTRONIC TECHNOLOGY