Operation Manual

EMBROIDER
CAUTION
Unplug the power supply cord before cleaning the machine. Otherwise, injuries or an electric
shock may occur.
3. Remove the flat bed attachment or the embroidery unit if either is attached.
4. Loosen the presser foot holder screw and remove the presser foot holder, and then loosen the
needle clamp screw and remove the needle.
1 Presser foot holder
2 Presser foot holder screw
3 Needle clamp screw
5.Grasp both sides of the needle plate cover, and then slide it toward you.
1 Needle plate cover
• The needle plate cover is removed.
6. Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
Bobbin case
7.Use the cleaning brush or a vacuum cleaner to remove any lint and dust from the race and
bobbin thread sensor and their surrounding area.
1 Cleaning brush
2 Race
3 Bobbin thread sensor
Note
•Do not apply oil to the bobbin case.
•If lint or dust collects on the bobbin thread sensor, the sensor may not operate correctly.
134/135 SINOJO OPTOELECTRONIC TECHNOLOGY