Operation Manual

UTILITY STITCHES
• For details, refer to "Cutting the thread".
■ Changing the needle position
The needle position used as the baseline is different for the straight stitch (left needle position)
CAUTION
● Be sure to turn off the main power before replacing the presser foot. Otherwise,
injuries may occur if (Start/stop button) is accidentally pressed and the machine starts
sewing.
Blind Hem Stitching
Secure the bottoms of skirts and pants with a blind hem. Two stitches are available for blind hem stitching.
caution
● Be sure to turn off the main power before replacing the presser foot. Otherwise,
injuries may occur if (Start/stop button) is accidentally pressed and the machine starts
sewing.
Sew a blind hem according to the following procedure
Memo
 When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the
fabric will not feed and desired results may not be achieved.
A Reverse the skirt or pants
B Fold the fabric along the desired edge of the hem, and press.
74/135 SINOJO OPTOELECTRONIC TECHNOLOGY