Specifications

Sinope technologies, 705 Montrichard, St-Jean-Sur-Richelieu, Qc, Canada, J2X5K8
T :450-741-7700
TX power settings
The maximum power setting can be used for all 802.15.4 channels,.
Dimensions:
Compliance Statements:
FCC Compliance Statement (Part 15.19)
This transmitter module meets the FCC Rule Part 15C requirements.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
The final host product still requires Part 15B compliance testing with the modular transmitter
installed.
Responsibility to the FCC Rules and Regulations
The ZBM1501 Module has been certified per FCC Part 15 rules for integration into products
without further testing or certification. To fulfill the FCC certification requirements the Radio
Module must ensure that the information provided on the Module Label is placed on the outside
of the final product.
The Radio Module is labeled with its own FCC ID Number. If the FCC ID is not visible when the
module is installed inside another device, then the outside of the device into which the module is