User Manual

Banana PI User Manual

www.sinovoip.com.cn www.banana-pi.com

CON1 P31 CSI-D7 PE11

CON1 P32 CSI1-STBY-EN PH18

CON1 P33 RESET#

CON1 P34 CSI1-RESET# PH13

CON1 P35 CSI-IO0 PH11

CON1 P36 HPR

CON1 P37 HPL

CON1 P38 IPSOUT

CON1 P39 GND

CON1 P40 IPSOUT

LVDS specification

LVDS (LCD display interface)

The LVDS Connector is a 40-pin FPC connector which can connect external LCD panel (LVDS) and touch screen

(I2C) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi

board as “CON2″.

Multiplex Function Select GPIO

LVDS Pin Pin Name

Multi 1 Multi 2

CON2 P01 IPSOUT(5V output)

CON2 P02 TWI3-SDA PI1

CON2 P03 IPSOUT(5V output)

CON2 P04 TWI3-SCK PI0

CON2 P05 GND

CON2 P06 LCD0-IO0 PH7

CON2 P07 LCDIO-03 PH12

CON2 P08 LCD0-IO1 PH8

CON2 P09 LCD0-D0 LVDS0-VP0 PD0

CON2 P10 PWM0 PB2

CON2 P11 LCD0-D1 LVDS0-VN0 PD1

CON2 P12 LCD0-IO2 PH9

CON2 P13 LCD0-D2 LVDS0-VP1 PD2

CON2 P14 LCD0-DE PD25

CON2 P15 LCD0-D3 LVDS0-VN1 PD3

CON2 P16 LCD0-VSYNC PD27

CON2 P17 LCD0-D4 LVDS0-VP2 PD4

CON2 P18 LCD0-HSYNC PD26

CON2 P19 LCD0-D5 LVDS0-VN2 PD5

CON2 P20 LCD0-CS PH6