User's Manual
Table Of Contents
11
Mounting / Removing Lens Ring and Lens Cover
Removing lens cover:
Turn the lens cover according to the illustrated direction until it separates from
the 4KVR360.
Mounting lens cover
Turn and irmly tighten the lens cover according to the illustrated direction.
The lens cover protects the lens from being damaged (dustproof, shockproof and splash proof). Using the lens cover when taking a photo/shooting a video
will not inluence the image/video quality.
Before mounting the lens cover, make sure the lens surface is clean and dry. Always use a clean, lint-free dry cloth to clean the lens before shooting or
recording so it will not aect the photo or video quality.
When the 4KVR360 is exposed to extreme temperature dierences condensation may form inside of the lens cover. If this happens, remove the lens cover,
clean it with a soft, dry, lint-free cloth, and then reinstall the lens cover.
If the 4KVR360 will not be used for a period of time, always put the protective cover on it (as shown in the igure).
The processes of mounting/removing lens ring and lens cover are the same, with lens cover as an example as below: