User's Manual

34
In case of successful pairing between the camera and the remote control:
1. If the camera is powered off, the camera is powered on and start recording by pressing the button on the remote control.
2. The camera is powered on or whether the remote control is paired successfully is tested by pr
essing the
button. The camera will be powered off by
pr
essing and holding the
button (more than 1.5 seconds).
3. For the mini remote control, all settings or parameters of shooting or recording are the same as those of the camera.
Upon successful pairing, both the remote control and camera will remember the BlueTooth information.
Indicator lamp status description:
1. If pairing succeeds, the signal indicator lamp turns green.
2. If pairing fails, the signal indicator lamp turns red.
3. When recording or shooting with a mini remote control, the shooting status indicator lamp turns red.
4. When the remote control's battery level is less than 20%, the indicator turns orange.
Precautions:
1. If the Wi-Fi (NFC), HDMI connection or computer connection of the camera are already enabled, the remote control function is unavailable.
2. The remote control operates at band 2.4GHz. Since microwave ovens, radios and amateur radios also use the same cyclic wave,
it is possible to generate radio
inter
ference.
3. Before using the remote control, make sure there are no other electronic devices or radio stations, etc. around. Please use it in an envir
onment with better
perme
ability and free from obstructions.
4. Radio interference and other reasons may cause malfunction of the remote control. Pay attention to the actual condition of the camera when using the r
emote
contr
ol.