Install Instructions

Plastic Bend Support

Instruction Sheet

2 3

Insert end of tube into top ‘nose’

of plastic bend support.

Holding opposite end of tube,

guide tube through radius and

around small hook on ‘tail’ end

of the bend support.

Plastic elbow may be installed on either side of stud, with ﬂ exible supply tube from above or below.

Using nails or screws, install

plastic elbow directly to stud.

Using longer screws, two plastic

elbows may be stacked against

one side of the stud.

Installation complete. Two plastic elbows may be

installed to straddle a st

ud for

hot and cold supply.

1-800-821-3944 • www.siouxchief.com