Install Instructions

F1807 Application Problems

Crimp joint made with an improperly calibrated tool - not

providing enough compression to joint.

Ring compressed multiple times possibly developing a

leak path.

Crimp Tool did not engage the Crimp Ring over the entire

surface of the ring.

Tube not cut squarely – ring not compressing tube for a

secure seal.

Fitting not inserted completely into tube end.

Ring not placed over sealing barbs of tting. Ring too far

forward or too far back & not fully over sealing barbs.

ASTM F1807 Crimp Installations & Application Problems

PowerPEX ASTM

F1807 Crimp ttings

are made for use with

a copper crimp ring or

Sioux Chief's ASTM

F877 V-Sleeve ONLY.

Cinch type or pinch

type clamps and rings,

hose clamps or other

proprietary clamps are

not covered by Sioux

Chief's Warranty.