Install Instructions

ManualsBrandsSioux Chief ManualsHeating SuppliesPowerPEX 1" PEX x 1" Female Sweat Copper Pipe Straight Adapter (Lead Free)

Adjustments to Crimp & Press Tools

USE: Tool adjustment

methods differ for various

models. Read instructions.

Generally, remove C-Clip and

rotate preload pin to a new

position and re-install clip

(see page 25).

Protection for Crimp & Press Tools

USE: Place Tool in protective case or secure box to

assure the tool head remains free from abuse.

Copper Crimp Ring & V-Sleeve

Stainless Steel Sleeve

Go/No Go Gauge

USE:

1. If ‘Go’ ts over connected ring/sleeve and ‘No Go’

does not, tool is properly making the connection.

2. If ‘Go’ does not t over ring/sleeve, handle pre-load

must be increased.

3. If ‘No Go’ ts over connected ring/sleeve, the joint

is over-crimped. Remove joint. Decrease pre-load and

check again.

Do not le or adjust the 'Go' or 'No Go' gauge.

The gauge must be perpendicular to the ring and

tubing length being checked.

3/8" GO

3/8" NO GO

1/4" GO

1/4" NO GO

1/2" GO

1/2" NO GO

1" GO

1" NO GO

Tool is working properly:

'Go' ts over ring/sleeve

and 'No Go' does not

Tool is NOT working properly:

'Go' does not t over ring/sleeve

or 'No Go' does t over ring/sleeve