Install Instructions

ASTM F1960 Grip Tools
Expansion Tool Verication and Use
(½" - 1")
USE:
1. Attach appropriately sized expansion head to an
ASTM F1960 Grip expansion tool.
2. Ensure assembly is wholly intact and the male
threads of the tool or female threads of the jaw set are
not compromised.
3. Ensure the retention spring on the OD of the tool
jaw is in place and not compromised. If a jaw section is
missing or damaged, replace the expansion jaw.
4. Keep the expansion jaw and the tool driver
properly lubricated.
5. Place tool jaw into tube end/ring assembly and
compress handles to expand for tting install.
Note: For any battery issues with F1960 power tools
under warranty, call Sioux Chief customer service.
ASTM F1960 Grip Tools