Submittal Sheet

SPECIFICATION
Sioux Chief ASTM F1807 Crimp™ brass/copper PEX tting system shall
be used in hot and cold water distribution systems and hydronic heating
applications. Fittings are approved for use with ASTM F876 PEX tubing with
copper crimp ring or stainless steel compression sleeve. Please contact Sioux
Chief representative for specic product information within the Sioux Chief
ASTM F1807 product offering.
MATERIALS
Copper, No-Lead Brass*
INSTALLATION NOTES
Full installation instructions can be found at www.siouxchief.com. Cut tube
at 90-degrees. Do not crush OD of tubing with cutters. Be sure crimp/
compression tool is properly calibrated. Compress with tool perpendicular
to tube. Compress only once. Use a gauge to assure a proper joint. Remove
defective connections. Pressure test all joints before use.
DIMENSIONS per ASTM F1807
⅜"
½" ¾" 1"
A: Ftg inside diameter
0.230" min 0.350" min 0.530" min 0.710" min
B: Copper ftg wall thickness
Brass ftg wall thickness
0.025" min
0.025" min
0.028" min
0.028" min
0.032" min
0.037" min
0.035" min
0.041" min
C: Ftg barb diameter
0.345"
+/- 0.004
0.471"
+/- 0.004
0.667"
+/- 0.004
0.856"
+/- 0.004
D: Fitting end length
0.625" min 0.625" min 0.625" min 0.625" min
*
Material is C69300 dezincification and SCC resistant, and is compliant with NSF-61 Annex G and California No Lead Plumbing Law
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
6-20
6_X SERIES
Item Number Series
ASTM F1807 PEX
BRASS/COPPER FITTING SYSTEM
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������
632X_ = Copper MIP Elbow Adapters
632XG_ = Brass MIP Elbow Adapters
637X_ = Copper FIP Swivel Adapters
637XG_ = Brass FIP Swivel Adapters
640XG_ = Brass Plugs
B
A
D
Crimp
™
C
641XG_ = Brass Tees
642X_ = Copper Elbows
642XG_ = Brass Elbows
643X_ = Copper MSWT Adapters
643XG_ = Brass MSWT Adapters
644X_ = Copper FSWT Adapters
644XG_ = Brass FSWT Adapters
645X_ = Copper Couplings
645XG_ = Brass Couplings
646XG_ = Brass MIP Adapters
647X _ = Copper FIP Adapters
647XG_ = Brass FIP Adapters
672X_ = Copper Manifolds
672XG_ = Brass Multi-port Tees
Copper Fittings