Product Overview

SPECIFICATION
Sioux Chief 650 Series piston-type water hammer arresters shall be
required in piping systems. Water hammer arresters shall have sufcient
volume of air to dissipate the calculated kinetic energy generated in the
piping system. Arresters shall be effective when installed at any angle.
Arresters shall be approved for installation with no access panel required.
Water hammer arresters shall be ANSI/ASSE 1010 2004 certied.
Arresters shall be sized and placed per manufacturer’s instructions.
INSTALLATION
May be installed at any angle. No access panels required. Compatible with
Press Fittings or Push Fittings. Refer to instructions on product package,
catalog or website.
MATERIALS
Arrester body: type L copper tube
Piston: poly piston with two EPDM o-rings
Male thread tting: copper MIP thread
Piston lubrication: Dow-Corning, 111 FDA approved silicone compound
PEX F1960 tting: No Lead EcoBrass 69300
CERTIFICATIONS/APPROVALS
Certied by ASSE to the ANSI/ASSE 1010-2004 standard
WORKING LIMITS*
Max working temperature: 250º
Max working pressure: 350 PSIG
Burst tested: to 2,900 PSIG
*PEX and CPVC connection specications are limited to those called out in their respective ASTM
Standards for Fittings (CPVC D2846, PEX F1807, PEX 1960).
DIMENSIONS
Arrester size
A B C D E F
Overall height
Male thread 6½" 8¾" 11" 10
1
8
" 12
5
8
15
1
8
"
Male sweat 8¼" 10" 12½" 11" 13½" 16"
CPVC 7½" 9½" 12" — — —
PEX F1807 6½" 8¾" 11" — — —
PEX F1960 6½" 8¾" 11" — — —
Chamber width 1
3
8
" 1
3
8
" 1
3
8
" 2
1
8
" 2
1
8
" 2
1
8
"
Connection size ½" ¾" 1" 1" 1" 1"
Volume (cu. in.) 5 7 11 20 29 36
Fixture units 1–11 12–32 33–60 61–113 114–154 155–330
650 SERIES
cold-rolled, spun
closed seamless
chamber end
pressurized
air cushion
seamless cold
formed reduction
lead-free
solder joint
poly piston with two
EPDM o-rings lubricated
with Dow-Corning, 111
FDA approved
silicone compound
652-A
MIP
CPVC PEX F1807 Male Sweat PEX F1960
WATER HAMMER ARRESTERS
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
8-19
Choose Item Number
652-A = A size, MIP
653-B = B size, MIP
654-C = C size, MIP
655-D = D size, MIP
656-E = E size, MIP
657-F = F size, MIP
652-AS = Sweat/Press-Fit
653-BS = Sweat/Press-Fit
654-CS = Sweat/Press-Fit
655-DS = Sweat/Press-Fit
656-ES = Sweat/Press-Fit
657-FS = Sweat/Press-Fit
652-AX = A size, PEX 1807
653-BX = B size, PEX 1807
654-CX = C size, PEX 1807
652-AWG = A size, PEX 1960
653-BWG = B size, PEX 1960
654-CWG = C size, PEX 1960
652-AC = A size, CPVC socket
653-BC = B size, CPVC socket
654-CC = C size, CPVC socket
HydraRester™