Product Overview

WATER HAMMER ARRESTERS
650 SERIES
SPECIFICATION
Sioux Chief 650 Series piston-type water hammer arresters shall be required in
piping systems. Water hammer arresters shall have sufficient volume of air to
dissipate the calculated kinetic energy generated in the piping system. Arresters
shall be effective when installed at any angle. Arresters shall be approved for
installation with no access panel required. Water hammer arresters shall be
ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per
manufacturer’s instructions.
MATERIALS
Arrester body: type L copper tube
Piston: poly piston with two EPDM o-rings
Male thread tting: copper MIP thread
Piston lubrication: Dow-Corning, 111 FDA approved silicone compound
PEX F1960 tting: No Lead EcoBrass 69300
WORKING LIMITS*
Max working temperature: 250°F
Max working pressure: 350 PSIG
Burst tested: to 2,900 PSIG
* PEX and CPVC connection specications are limited to those called out in their respective ASTM
Standards for Fittings (CPVC D2846, PEX F1807, PEX F1960).
INSTALLATION
Angle: May be installed at any angle
Access panels: No access panels required
Sweat connection: Compatible with Press Fittings or Push Fittings
SIZING & PLACEMENT
Refer to instructions on product package, catalog or website.
CERTIFICATIONS/APPROVALS
Certied by ASSE to the ANSI/ASSE 1010-2004 standard
DIMENSIONS
Arrester size A B C D E F
Overall height
male thread 6½" 8¾" 11"
10
1
8
" 12
5
8
" 15
1
8
"
male sweat 8¼" 10" 12½" 11" 13½" 16"
CPVC 7½" 9½" 12" — — —
PEX F1807 6½" 8¾" 11" — — —
PEX F1960 6½" 8¾" 11" — — —
Chamber width
1
3
8
" 1
3
8
" 1
3
8
" 2
1
8
" 2
1
8
" 2
1
8
"
Connection size ½" ¾" 1" 1" 1" 1"
Volume (cu. in.) 5 7 11 20 29 36
Fixture units 1–11 12–32 33–60 61–113 114–154 155–330
652-A
MIP
CPVC PEX F1807 PEX F1960Male Sweat
HydraRester
™
1010
Choose Item Number
652-A = A size, MIP
653-B = B size, MIP
654-C = C size, MIP
655-D = D size, MIP
656-E = E size, MIP
657-F = F size, MIP
652-AS = A size, sweat
653-BS = B size, sweat
654-CS = C size, sweat
655-DS = D size, sweat
656-ES = E size, sweat
657-FS = F size, sweat
652-AC = A size, CPVC socket
653-BC = B size, CPVC socket
654-CC = C size, CPVC socket
652-AX = A size, PEX F1807
653-BX = B size, PEX F1807
654-CX = C size, PEX F1807
cold-rolled, spun
closed s eamles s
chamber end
pres surized
air cushion
seamless cold
formed reduction
lead-free
solder joint
poly pisto
n with
two EPDM o -rings
lubricated wit h
Dow-Co rning, 111
FDA approved
silicone compound
PRESS-
FI
TTIN
G
652-AWG = A size, PEX F1960
653-BWG = B size, PEX F1960
654-CWG = C size, PEX F1960
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
5-15
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������