Submittal Sheet

SPECIFICATION
Sioux Chief 650/660 Series piston-type water hammer arresters shall be
required in piping systems. Water hammer arresters shall have sufcient
volume of air to dissipate the calculated kinetic energy generated in the
piping system. Arresters shall be effective when installed at any angle.
Arresters shall be approved for installation with no access panel required.
Water hammer arresters shall be ANSI/ASSE 1010 2004 certied. Arresters
shall be sized and placed per manufacturer’s instructions.
MATERIALS
arrester body: type L copper tube
piston: poly piston with two EPDM o-rings
male thread tting: no-lead brass MIP thread (see tables)
piston lubrication: Dow-Corning, 111 FDA approved silicone compound
WORKING LIMITS*
max working temperature: 250°F
max working pressure: 350 PSIG
burst tested: to 2,900 PSIG
* PEX and CPVC connection specications are limited to those called out in their respective
ASTM Standards for Fittings (CPVC D2846, PEX F1807).
INSTALLATION
angle: May be installed at any angle
access panels: No access panels required
SIZING & PLACEMENT
Refer to instructions on product package or in catalog.
CERTIFICATIONS/APPROVALS
650 series: Certied by ASSE to the ANSI/ASSE 1010 standard
660 series: Certied by ASSE to the ANSI/ASSE 1010 standard
DIMENSIONS
Arrester size AA A B C D E F
Overall height
male sweat 3⅜" 6½" 10" 12½" 11" 13½" 16"
male thread 3⅜" 8¼" 8¾" 11" 10⅛" 12⅝" 15⅛"
CPVC 4¼" 7½" 9½" 12" — — —
PEX crimp 4¼" 6½" 8¾" 11" — — —
Chamber width ⅞" 1⅜" 1⅜" 1⅜" 2⅛" 2⅛" 2⅛"
Connection size ½" ½" ¾" 1" 1" 1" 1"
Volume (cu. in.) 1.4 5 7 11 20 29 36
Fixture units 1–4 4–11 12–32 33–60 61–113 114–154 155–330
650 & 660 series Hydra-Rester
™
& Mini-Rester
™
□ 660-G2B AA size, MIP
□ 660-SB AA size, sweat
□ 660-V82B AA size, male CPVC
□ 660-V2B AA size, CPVC socket
□ 660-X2B AA size, PEX crimp
□ 652-AS A size, sweat
□ 652-AC A size, CPVC socket
□ 652-AX A size, PEX crimp
□ 652-GA A size, MIP
□ 653-BS B size, sweat
□ 653-BC B size, CPVC socket
□ 653-BX B size, PEX crimp
□ 653-GB B size, MIP
□ 654-CS C size, sweat
□ 654-CC C size, CPVC socket
□ 654-CX C size, PEX crimp
□ 654-GC C size, MIP
□ 655-DS D size, sweat
□ 655-GD D size, MIP
□ 656-ES E size, sweat
□ 656-GE E size, MIP
□ 657-FS F size, sweat
□ 657-GF F size, MIP
□ 652-A A size, MIP
□ 653-B B size, MIP
□ 654-C C size, MIP
□ 655-D D size, MIP
□ 656-E E size, MIP
□ 657-F F size, MIP
WATER HAMMER ARRESTERS
cold-rolled, spun
closed seamless
chamber end
pressurized
air cushion
seamless cold
formed reduction
rolled piston stop
heat sink
lead-free
solder joint
poly piston with
two EPDM o-rings
lubricated with
Dow-Corning, 111
FDA approved
silicone compound
652-A660-G2B
STANDARD
NO-LEAD PRODuCT
Sioux Chief Manufacturing Company • tel: [phone] • www.siouxchief.com • fax: [phone]
Item # Submitted �����������������������������������
Job Name �����������������������������������������
Location ������������������������������������������
Engineer ������������������������������������������
Contractor ����������������������������������������
PO# �������������������� TAG ���������������������
10-11