Submittal Sheet

WATER HAMMER ARRESTERS
660-GT SERIES
SPECIFICATION
Sioux Chief 660-GT Series piston-type water hammer arresters shall be
installed where required on supply lines to quick closing valves/faucets. Water
hammer arresters shall be specifically sized and have sufficient volume of air
to dissipate the calculated kinetic energy generated by closing residential or
commercial faucets. Arresters shall be installed on both hot and cold supply lines
where applicable. Arresters shall be approved for installation with no access
panel required.
MATERIALS
Arrester body: 304 stainless steel tube
Piston: poly piston with two EPDM o-rings
Tee body: No Lead brass (unnished)
WORKING LIMITS
Max working temperature: 250°F
Max working pressure: 350 PSIG
Burst tested: to 1,500 PSIG
INSTALLATION
lnstall MiniRester within 6 feet of culprit valve or faucet. Approved for installation
with no access panels.
CERTIFICATIONS/APPROVALS
Certied by ASSE to the ANSI/ASSE 1010-2004 standard, AA size
cUPC listed to UPC and Canadian codes and standards
DIMENSIONS
Overall height 4"
Trunk width 2"
Chamber width
7
8
"
660-GTC1B 660-GTX2B
MiniRester
™
1010
Choose Item Number
multiple connection
options avaiable
seamless chamber end
pressurized
air cushion
poly piston with two EPDM o-rings
lubricated with Dow-Corning, 111
FDA approved silicone compound
660-GTC0B = ¼" OD compression tee
660-GTC1B
=
3
8
" OD compression tee
660-GTB
=
5
8
" OD compression tee
660-GTX2B = ½" F1807 PEX Crimp tee
660-GTW2B = ½" F1960 PEX Grip tee
660-TKB = ballcock thread tee
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
5-14
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������