Submittal Sheet

ManualsBrandsSioux Chief ManualsCopper Crimp Valved Manifolds1" Copper Manifold w/ 1/2" Crimp Balancing Valves 4 Outlets

Item # Submitted

Job Name

Location

Engineer

Contractor

PO# TAG

MANIFOLD - ASTM F1807 PEX CRIMP

672 SERIES

672X0490

672X0699

e.g. 672X0490 = 1" L copper trunk, 4 1/2" ASTM F1807 no lead branches, 3/4" PEX inlet x spun closed

Additional options available at www.siouxchief.com

672 A B C

B Branch multiples

02 2 branches

03 3 branches

04 4 branches

06 6 branches

08 8 branches

10 10 branches

12 12 branches

13 13 branches, etc

A Manifold Type

X F1807 branch NL(No Lead)

XV F1807 branch & Valve

XGV F1807 NL branch & Valve

C Compression PEX

CV Comp. PEX valve

CB Comp. PEX balancing valve

BXT Slab Manifold/Multi-port tee

C Trunk type

90 1" L, 3/4" PEX x Spun Closed

99 1" L, 3/4" PEX x 3/4" PEX

77 1" L, 1" PEX x 1" PEX

70 1" L, 1" PEX x Spun Closed

30 1" L, 3/4" Male Sweat x Spun Closed

40 1" L, 1" Male Sweat x Spun Closed

97 1" L, 3/4" PEX x 1" PEX

44 1" L, 1" Male Sweat x 1" Male Sweat

10 1" L, 1" Female Sweat x Spun Closed

Create Item Number

672XV0590

Sioux Chief Manufacturing Company │ P: 1.800.821.3944 │ F: 1.800.758.5950 │ www.siouxchief.com

10-13

PowerPEX

™

SPECIFICATION

Sioux Chief ASTM F1807 manifolds shall be used in plumbing systems for safe

distribution of hot or cold water. Manifolds shall be used in new construction

or remodel applications. Manifolds can be utilized in various layouts and shall

provide appropriate water distribution to supply ﬁ xtures through 3/4" or 1" trunk

lines. F1807 manifolds shall be offered with or without valves and in various

outlet multiples. Trunk lines can be formed to provide sweat connections, spun

reduced, spun closed, or provided with F1807 inlets/outlets. Each manifold shall be

assembled with no lead solder or braze and tested by Sioux Chief prior to shipment.

MATERIALS

Trunk: Copper

End Outlet: Copper or C69300* Brass

Branch: Copper or C69300* Brass

Solder: No Lead

*693 brass used in brazed conﬁ gurations

APPLICATIONS

For use with hot and cold water distribution systems.

OPERATING TEMPERATURE/PRESSURE

35°F – 140°F / 20 psi – 60 psi

CERTIFICATIONS

complies with NSF 14 and 61.