User Manual

3. You may run into a message from Microsoft that requires “Digital Signature” on the

driver. It is safe to ignore this message, and click “Yes” to complete setup.

4. On the setup complete screen, select “Yes, I want to restart my computer” and click

“Finish”.

Note: Please save and close all running programs so that you do not lose any important

document.

Connecting the StyleCam Deluxe to Your PC

Before downloading any images or video, you must connect the StyleCam Deluxe to your

computer with the supplied USB cable. Please make sure that the StyleCam Deluxe CD is

inserted in the CD-ROM drive the first time you plug the camera to the computer. Also, we

recommend that there are no image or video saved on the StyleCam Deluxe. Please follow the

instructions below to connect your camera to your computer. (Note: Do not connect the USB

cable until after installing the bundled software).

1. Plug the smaller USB connector to your StyleCam Deluxe USB port (located on the

right side of the camera).

2. Plug the larger USB connector to the USB port on the back of your computer.

3. The StyleCam Deluxe is BUS-powered, so once it’s connected to the computer, it will

automatically power on, and the status LCD will display the

icon to indicate that it