User Manual

When your StyleCam Deluxe is at full power, the battery indicator on the LCD display will be
fully shown. When power is low, the icon will flash. This indicates that the batteries are weak
and need to be replaced.
Note: The StyleCam Deluxe allows one (1) minute to change the batteries without losing all the
images saved on the camera. If possible, we recommend that you download all images to your
computer before changing batteries.
Full memory warning
When your StyleCam Deluxe’s memory is full, the USB indicator and all icons on the LCD will
flash together.
Taking Pictures & Deleting Pictures
Before taking pictures with StyleCam Deluxe, make sure that the battery has sufficient power.
Check the battery indicator on the status LCD for battery power level. Please follow the
instructions below to take pictures with the StyleCam Deluxe.
1. Turn on your StyleCam Deluxe by pressing the Power/Mode button. Your camera’s
status LCD will display camera information such as resolution (refer to Table 2),
capture mode, flash, etc.
2. Use the Power/Mode button to select your desired setting. (E.g. capture mode with
two stars).
3. Find your subject by looking through the viewfinder.
4. Hold still and press the shutter button firmly to take the picture.
5. When you release the shutter button, you’ll hear a beep sound to confirm the picture
has been taken.
Table 2 – Resolution Settings
Mode Resolution Level of compression
Three stars 1280 x 1024 Uncompressed
Two stars 1280 x 1024 1/6 compression
One Star 640 x 512 1/4 compression
Movie mode
320 x 240 1/8 compression
Self-timer mode
1280 x 1024 1/6 compression
Taking a picture with the flash
When the red LED is on, there is insufficient light for the camera to take a good picture without
using the flash. If the StyleCam Deluxe is in auto flash mode, the flash will fire automatically
when the shutter button is pressed.
13