User Manual

Green LED - Sufficient light Red LED - Insufficient light
1. To turn on the flash, press the Flash button, and you will see the flash icon appear in
the status LCD.
2. The flash icon will blink for 5 seconds, and then stabilize.
3. Once the icon stops blinking, the camera is ready to take a picture.
4. Follow the procedure described above to take a picture.
Important Notes About Auto Flash
• The flash will yield best performance at a distance of 3 to 9 feet (1-3 meters) between
the camera and the subject. The subject may be over exposed if you stand less than 3
feet (1 meter) to your subject.
Important Notes for Taking Pictures
• Please make sure that your fingers or the strap do not obscure the lens when taking a
picture.
• Ensure that the lens is clean; refer to “Camera Maintenance” for cleaning instructions.
• Hold the camera steady as you take a picture to avoid blurry images.
Taking Picture with the Self-timer
You can set up the StyleCam Deluxe with the 10-second self-timer so that you can appear in
the photo. The resolution level for self-timer mode is fixed at two stars only. Please follow the
instructions below to take a picture with the self-timer.
1. Power on your StyleCam Deluxe by pressing the Power/Mode button.
2. Press the Power/Mode button to scroll to self-timer mode (the self-timer icon should
appear in the status display).
3. Find your subject through the viewfinder; place your StyleCam Deluxe on a flat and
steady surface.
4. Press the shutter button once, and the camera will start beeping. You have 10 seconds to
position yourself before the camera takes a picture.
Note: The StyleCam Deluxe can only take pictures with the self-timer in two-stars resolution
mode.
How to Delete Pictures
The StyleCam Deluxe allows you to delete the LAST image saved on your digital camera or
14