User Manual

My CD installation wizard does
not work.
The auto installation file is
switched to off. Or the CD-ROM is
disconnected.
Go to your computer desktop, and
right-click on “My Computer”.
Select “Properties” Æ “Device
Manager”. Double click on
“CD-ROM”, and then double click
on “CD-R”. Click on “ Setting”,
make sure “Auto insert notification
“ is checked and the “Disconnect
“ is checked. If you change the
settings the computer will ask you
to restart your PC. Click “Yes “
The image counter on the LCD is
flashing after I took my last image.
The StyleCam Deluxe is
processing the image.
Wait for the image counter to stop
flashing and then take your next
image. You may need to wait a
further 20 seconds before taking
the next image.
I get a blurred image when
uploading my images to my
computer.
There may be a momentary delay
between pressing the shutter
button and the actual exposure.
Hold your StyleCam Deluxe
steady until you hear a “beep”
which indicates the exposure is
completed.
I press the shutter button and
there is no response.
The click-to-click time is between
2 - 5 seconds depending on
whether or not the flash is
enabled.
Please wait for the camera to
refocus when taking pictures
consecutively.
Found error in software
installation.
If your computer already has
some of the programs installed,
the automatic installation may
have caused some error.
Please install the software again
selecting “Custom” Installation.
My StyleCam Deluxe camera
cannot power-on after inserting
fresh batteries.
The camera may not power up
immediately if you exceed one (1)
minute to change the batteries.
Reset the camera by pressing the
RESET button ONCE with a paper
clip inserted into the reset access
located on the battery door. Wait
for the green LED light to flash,
and then the camera will function
normally.
23