Installation Guide

Faucet Installation
E
C
F
A
A. Turn off the water supply. Remove the faucet
and faucet handles with the mounting
hardware attached from the package.
B. Insert the shank of the faucet handle body
into the hole of the sink deck.
From the underside of the sink or mounting
surface, attach the gasket and washer,
followed by the lock nut, onto the shank.
D
B
C. (1) Using a phillips screw driver (2) tighten
the mounting screws untill secure. (3) Lower
the the lock nut to onto the mounting
surface (4) followed by the faucet handle.
Repeat above steps for second faucet handle.
D. Remove all mounting hardware from
the faucet shank.
E. From the underside of the sink or mounting
surface, attach the gasket and washer,
followed by the lock nut, onto the shank.
Tighten mounting screws until secure.
F. Attach the Tee tting to the faucet shank.
Tighten using an adjustable wrench until
secure.
2
Installation Guide
shank
gasket
washer
lock nut
mounting
screws
quick
connect
*cone washer
*coupling nut
1
2
3
4
gasket
washer
lock nut
washer
tee tting
lock nut
lock nut
*Coupling nut and cone washer are optional for this
installation depending on your waterline connection.
pop-up stem guide nut