Installation Guide

ManualsBrandsSir Faucet ManualsBath2-Handle Deck-Mount Roman Tub Faucet in Brushed Nickel

Model 719

Roman Tub Faucet Set

Tools

Certifications & Information

Configuration

Installation Guide

Gather the necessary tools as shown to complete the installation of this faucet.

Connect to water supply lines with TWO

3/8" Compression Faucet Connectors

Three-hole Installation

6"-24" Centerset

Adjustable Wrench

GPM

Flow Rate Chart

PSI

10 20 30 40 50 60 70 80

2.5

1.5

Faucet

Sir

Water supply

Connector

1Installation Guide

• ADA Approved

• Limited Lifetime Warranty

Phillips screwdriver

1 1/4"

The following tools are optional:

FlashlightSafety Glasses Channel Lock

Pliers

8" 8"

Summary of content (4 pages)

PAGE 1
Installation Guide Model 719 Roman Tub Faucet Set Certifications & Information • • ADA Approved Limited Lifetime Warranty GPM Flow Rate Chart 3 2.5 2 1.5 0 0 10 20 30 40 50 60 70 80 PSI Tools Gather the necessary tools as shown to complete the installation of this faucet.
PAGE 2
Installation Guide Faucet Installation A. Turn off the water supply. Remove the faucet and faucet handles with the mounting hardware attached from the package. A B handle cover B. Insert a phillips head screw driver into the faucet handle body removing the set screw. Separating the valve body from the handle body. set screw handle body shank lock nut faucet base valve body C. From the underside of the sink or mounting surface, attach the gasket and washer, followed by the lock nut, onto the shank.
PAGE 3
Installation Guide Faucet Installation Continued G. Ensure that the o-ring is properly secured in the tee fitting before attaching. G Tighten the tee fitting on to faucet shank. Secure all fittings with a 1/4 turn of a wrench. o-ring tee fitting H. Attach the hot and cold supply lines to the Tee fitting at the faucet base. H Attach the opposite end of each hose to the corresponding valve body fittings by tightening the 3/8" compression fittings onto the lines.
PAGE 4
www.mrdirectint.com sales@mrdirectint.com 1-877-946-5725 Important Turn on the water supply SLOWLY, to test for leaks before completely opening the water lines. To prevent damage to the tube body, tighten the connections by carefully using two wrenches as shown. Use caution to not bend the stem. Check for leaks. Cleaning Information Simply rinse and dry faucets with a soft towel every week to prevent mineral deposits from forming. Clean spills and splatters as they happen.