Instruction Manual

[ Installation ]

Installation

Considerations

Certain vehicle models will require adapters to connect the vehicle’s AM/FM antenna to the

FM Direct Adapter, and to connect the FM Direct Adapter to the vehicle’s AM/FM radio. Your

SIRIUS retailer may sell these adapters, or a professional installer may be able to provide

them.

Vehicle Installation

To install the FM Direct Adapter in your vehicle, refer to Figures 1 & 2 and follow these steps:

Remove the vehicle’s AM/FM radio from the dash and disconnect the vehicle’s AM/FM

antenna cable from the rear of the radio.

Plug the FM antenna cable from the FM Direct Adapter into the same connector on

vehicle’s AM/FM radio. (An additional adapter may be required.)

Plug the vehicle’s AM/FM antenna cable (which was disconnected from the vehicle’s

AM/FM radio) into the female FM antenna socket of the FM Direct Adapter. (An ad-

ditional adapter may be required.)

Plug the mini-connector of the FM Direct Adapter into the FM OUT connection on your

SIRIUS radio (for radios without a vehicle dock), or into the FM OUT connection on your

SIRIUS vehicle dock (for radios with a vehicle dock).

Choose a channel on the FM band of the vehicle’s AM/FM radio that has little or no

reception from a local FM station. You can consult the SIRIUS website at http://www.

sirius.com/fmchannel for more information on finding a clear FM channel in your area.

Choose the same channel from the FM Frequency menu of your SIRIUS radio. (Refer to

the user guide of your SIRIUS radio for more details.)

If the installation is successful, you should hear the SIRIUS broadcasts through the vehicle’s

AM/FM radio.