User manual

68
Using Your Starmate 5
Jump
Depending upon how you configure it, jump will either tune to the
traffic and weather channel of a selected city, from a list of the 20 most
congested cities, or to a desired channel. This button allows you to quickly
tune to a channel that is accessed frequently and temporarily, such as
traffic/weather, sports, news, etc. and then tune back to the original
channel to which you were listening by pressing the button again.
If Jump is set to Traffic, and the traffic/weather
broadcast of your selected city is not immediately
available, the Band indicator on the display will
change to the jump icon to indicate that a jump is
pending. Once the traffic/weather report is ready to
be broadcast, the radio will automatically tune to the
traffic/weather channel. Since a channel may carry
the traffic and weather reports of more than one city,
you may have to wait a few minutes for your desired
broadcast. If Jump is set to JumpSet, pressing jump
will immediately tune to the desired channel.
Pressing jump while a jump is pending will cancel the jump. Pressing jump
after the radio has tuned to the traffic/weather or desired channel, will return
it back to the channel to which you had been listening immediately prior to
pressing jump.
TIP! To select a city for traffic/weather, refer to “Jump Settings” on page 95.