User's Manual

14
Home Signal Distribution Kit Installation Guide
The next diagram shows the same conguration as the previous illustration.
You can see that one output of the multiswitch is connected to the input of the
Combiner, and that there are no devices such a splitter or DishPro adapter in the
common cable run between the Combiner and Splitter. If a DishPro adapter is
needed, it must be installed after the Splitter as shown.
WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER:
RECVR/TUNERs
COMBINER
MULTISWITCH
RECVR/TUNERs
MULTISWITCH
SIRIUS
RECEIVER
COMMON
CABLE RUN
RECVR/TUNER
COMBINER
SPLITTER
DISHPRO
ADAPTER
SIRIUS
RECEIVER
COMMON
CABLE RUN
RECVR/TUNER
SPLITTER