Manualshelf

User Guide

ManualsBrandsSirius Satellite Radio ManualsOtherSiriusConnect SIR-ALP1
12345678910
Sirius™ Connect USB interface board
Installation Instructions
Page 1 of 13
Created On Tuesday, March 14, 2006
This is for the SIR-ALP1
Disclaimers:
• Modifying the radio may void any outstanding warranty it may have.
• This product is not affiliated with Sirius Satellite Radio in any way.
• There are no warranties expressed or implied by purchase of this product.
• All boards are tested and verified 100% before shipping.
• While every care has been taken to provide a quality product, I cannot guarantee the board to
function correctly if installation is not done according to the instructions in this guide.
• I am not liable for misuse of this product. Misuse includes improper installation, damage to the
board or radio while trying to install, and illegal use of the modified radio.
Tools needed:
1. Small Philips screwdriver (p1).
2. Elbow grease.
3. A double sided mirror.
Screws already removed to save me some time.
Using the small Philips screwdriver, remove the 7 screws in the SILVER case.
(3 on each side, 1 on top)

Summary of content (13 pages)